PM Surya Ghar: get up to ₹78,000 subsidy on home rooftop solar — scheme open till 31 March 2027 · Check your subsidy →
Solar Technology

Solar Inverter Guide: String vs Hybrid vs Microinverter

Quick answer: String inverters are the lowest-cost choice for unshaded roofs; hybrid inverters add battery backup and smart energy management; microinverters optimise each panel for shaded or complex roofs. Size the inverter so the DC array is about 1.1–1.25 times the AC rating, choose enough MPPT inputs for your roof faces, and look for 97–98.5% peak efficiency with BIS certification.

What does a solar inverter do?

Solar panels produce direct current (DC). Your appliances and the grid use alternating current (AC). The inverter converts DC to AC, synchronises with the grid, tracks the panels’ maximum power point, protects against faults and records data for monitoring. In practice, the inverter decides how much of your panels’ potential you actually use, so it deserves as much attention as the modules.

How do string, hybrid and microinverters compare?

Feature String (on-grid) Hybrid Microinverter
Typical use Homes, C&I rooftops, ground-mount Homes and businesses needing backup Complex or shaded roofs, small systems
Battery support No Yes, built in Needs separate AC-coupled battery
Works during power cut No (anti-islanding shuts it off) Yes, for backed-up loads No, unless paired with backup system
Shading tolerance Moderate (depends on MPPTs) Moderate High, panel-level
Monitoring System / string level System, battery and load level Panel level
Relative cost per watt Lowest Higher Highest
Peak efficiency (typical) 97–98.8% 96–98% 95–97%

Central inverters, used in utility-scale plants, work on the same principle as string inverters but at much higher capacity.

How do you size an inverter correctly?

The DC/AC ratio (also called inverter loading ratio) compares the array’s peak DC capacity with the inverter’s AC rating. Panels rarely produce their rated output in Indian conditions because of heat, dust and sun angle, so slightly oversizing the array improves inverter utilisation.

  • 1.0–1.1: conservative; little clipping, but the inverter is under-used most of the day.
  • 1.1–1.25: common sweet spot for Indian rooftops.
  • 1.25–1.4: used in some C&I and utility plants to flatten output, accepting some midday clipping.

Always stay within the inverter’s maximum DC input power, maximum input voltage (with cold-morning voltage rise) and maximum input current per MPPT. Read more about clipping losses in our article on performance ratio and generation loss.

Why does MPPT count matter?

A maximum power point tracker finds the voltage at which a string delivers the most power. If two strings face different directions, or one is shaded in the afternoon, putting them on the same MPPT drags both down. Practical guidance:

  • Single-face, unshaded roof: one or two MPPTs is enough.
  • East-west or multi-level roofs: use one MPPT per orientation.
  • Large C&I inverters often have 6–12 MPPTs; use them to separate rows with different shading.
  • Check the MPPT voltage window; string voltage should sit inside it across seasons.

Which specifications actually matter?

  • Efficiency: look at European or weighted efficiency, not just the peak figure.
  • Operating temperature and derating: Indian rooftops can exceed 45°C ambient. Check at what temperature the inverter starts derating and install it in a ventilated, shaded spot.
  • Ingress protection: IP65 or higher for outdoor installation.
  • Certifications: BIS registration under the compulsory registration order, and compliance with relevant IEC and CEA grid connectivity standards.
  • Grid support functions: wide voltage and frequency ride-through helps on weak rural feeders.
  • Monitoring: Wi-Fi, 4G or RS485 data logging that can feed an energy management system.
  • Warranty and service: 5–10 years standard, with local service centres.

When should you choose a hybrid inverter?

Hybrid inverters make sense if your area suffers frequent load-shedding, if you want to store daytime solar for evening use, or if your business faces time-of-day tariffs. They manage solar, battery and grid together, prioritising self-consumption or backup as configured. For sizing the battery, use our battery backup calculator, and for business use cases read our guide to battery energy storage for business.

Note that PM Surya Ghar subsidy applies to the solar system; batteries are an additional cost. Check the national portal for current rules on eligible configurations.

Common inverter mistakes to avoid

  • Mounting the inverter in direct sun on a hot terrace, causing derating every afternoon.
  • Mixing different panel models or orientations on one MPPT.
  • Ignoring cold-morning open-circuit voltage, which can exceed the inverter’s limit.
  • Undersized AC cables, causing voltage rise and nuisance tripping on weak grids.
  • No surge protection devices, which matters during monsoon lightning.
Key takeaways

  • String inverters for simple, unshaded roofs; hybrid for backup; microinverters for complex roofs.
  • A DC/AC ratio of about 1.1–1.25 suits most Indian rooftops.
  • Use separate MPPTs for different orientations or shading patterns.
  • Check weighted efficiency, temperature derating, IP rating and BIS certification.
  • Plan for one inverter replacement over a 25-year system life.

Unsure which inverter suits your roof and load? Our engineers can recommend a configuration after a site survey. Browse our products or request a quote.

Frequently asked questions

What size inverter do I need for a 5 kW solar system?

Most designers in India use a DC-to-AC ratio between about 1.1 and 1.25, so a 5.5–6 kWp array is commonly paired with a 5 kW inverter, or a 5 kWp array with a 4.5–5 kW inverter. The right ratio depends on climate, tilt and the inverter's DC input limits.

Which is better: string inverter or microinverter?

String inverters are cheaper per watt and suit unshaded roofs with uniform orientation. Microinverters cost more but optimise each panel separately, which helps on partially shaded or multi-direction roofs and adds panel-level monitoring and safety.

What is MPPT in a solar inverter?

MPPT (maximum power point tracking) continuously adjusts voltage and current to extract the most power from the panels. Inverters with two or more MPPTs can handle strings with different orientations or shading without losing as much energy.

How long does a solar inverter last?

Grid-tied string inverters typically last 10–15 years, while modules last 25 years or more, so most owners should budget for one inverter replacement over the system life. Microinverters often carry longer warranties.

SolarEMS Editorial Team
Written and reviewed by our solar design & energy specialists. Figures are indicative as of November 2026 — always confirm current rules with the national portal or your DISCOM. About us

#hybrid inverter#microinverter#MPPT#solar inverter

Related guides

सूर्य की शक्ति, भारत की प्रगति

Get a free site survey & solar quote

Tell us your monthly bill and roof size. Our engineer will design the right system, estimate subsidy and share a transparent quote — no obligation.