Technical specifications
| Chemistry | Lithium iron phosphate (LiFePO4) |
|---|---|
| Nominal voltage / capacity | 51.2 V / 100 Ah |
| Energy | 5.12 kWh (≈4.6 kWh usable at 90% DoD) |
| Cycle life | ≥6,000 cycles at 80–90% DoD (25°C) |
| Max charge/discharge current | 100 A (≈1C) continuous typical |
| BMS | Built-in, cell balancing, over-/under-voltage, temperature and short-circuit protection |
| Communication | CAN / RS485 for hybrid inverters |
| Scalability | Parallel up to 8–16 modules |
| Operating temperature | Charge 0–50°C, discharge -10–55°C |
| Form factor / weight | Wall-mount or rack, ≈45–50 kg |
| Standards | BIS-certified (IS 16046 / IEC 62619 as applicable) |
Who is it for?
Homes and offices with a hybrid inverter that want reliable backup, households replacing old lead-acid inverter batteries, and small businesses that need daily solar shifting into the evening.
How does LFP compare with tubular lead-acid?
- Usable energy: about 90% versus about 50% for lead-acid.
- Cycle life: 6,000+ versus roughly 1,200–1,500 cycles.
- Maintenance: none versus regular distilled-water top-up.
- Space and weight: about one-third the size for the same usable energy.
- Upfront cost: higher, but lower cost per cycle over its life.
Technical specifications
| Specification | Typical value |
|---|---|
| Chemistry | Lithium iron phosphate (LiFePO4) |
| Nominal voltage / capacity | 51.2 V / 100 Ah |
| Energy | 5.12 kWh (≈4.6 kWh usable at 90% DoD) |
| Cycle life | ≥6,000 cycles at 80–90% DoD (25°C) |
| Max charge/discharge current | 100 A (≈1C) continuous typical |
| BMS | Built-in, cell balancing, over-/under-voltage, temperature and short-circuit protection |
| Communication | CAN / RS485 for hybrid inverters |
| Scalability | Parallel up to 8–16 modules |
| Operating temperature | Charge 0–50°C, discharge -10–55°C |
| Form factor / weight | Wall-mount or rack, ≈45–50 kg |
| Standards | BIS-certified (IS 16046 / IEC 62619 as applicable) |
Installation & warranty
Install indoors on a wall or rack away from direct sun, ideally below 35°C, since heat shortens battery life. We configure the inverter’s battery profile and communication so charge limits are respected. Warranties are typically 5–10 years or a stated energy throughput, whichever comes first. Size your bank with the battery backup calculator.
Key takeaways
- 51.2 V, 100 Ah, 5.12 kWh (≈4.6 kWh usable)
- 6,000+ cycles, roughly 10–15 years of daily use
- Built-in BMS and inverter communication
- Not covered by PM Surya Ghar subsidy
Want silent, maintenance-free backup? get a free quote for a lithium battery sized to your loads.
Frequently asked questions
How long will a 5.12 kWh battery run my home?
At 90% usable depth of discharge it supplies about 4.6 kWh. That runs a 500 W load (fans, lights, fridge, Wi-Fi) for roughly 8–9 hours, or a 1 kW load for about 4.5 hours.
Why is LFP preferred over other lithium chemistries for homes?
Lithium iron phosphate is thermally stable, has a long cycle life and does not use cobalt, which makes it a safer choice for indoor home energy storage.
Can I add more batteries later?
Yes. Most 51.2 V LFP modules can be paralleled, typically up to 8–16 units, if you add the same model.
How long does an LFP battery last?
Typically 6,000 cycles or more at 80–90% depth of discharge, which is roughly 10–15 years of daily cycling. Warranties are usually 5–10 years.