
Prices, subsidies and tariffs change from time to time. Call us or fill the form for the latest figures.
Over the last year, the most common call we get from existing solar owners is not about panels. It is about the meter: “Naya smart meter laga hai, export dikh nahi raha,” or “Prepaid balance itni jaldi kaise khatam hua?” This article explains what is changing and what you should check.
What is the smart meter rollout in 2026?
The Revamped Distribution Sector Scheme (RDSS) by the Ministry of Power funds DISCOMs to replace conventional meters with prepaid smart meters. Reports in early 2026 put installations at roughly 5 crore meters nationally, still well behind the original target, with states such as Uttar Pradesh, Bihar, Assam, Gujarat and Maharashtra running large programmes. Exact numbers change month to month, so check the national smart meter dashboard for current status.
A smart meter is an electricity meter that records consumption in short intervals, usually every 15 or 30 minutes, and sends readings to the DISCOM over a mobile or RF network without a meter reader visiting.
How does a smart meter work with solar net metering?
For net metering, the meter must record two things separately: units you import from the grid and units your solar system exports. Smart net meters have both registers, usually labelled kWh import and kWh export, and the billing system subtracts one from the other.
| Meter type | Records export? | Works for net metering? | What to do |
|---|---|---|---|
| Old electromechanical meter | No | No | Replace with net meter |
| Static (digital) net meter | Yes | Yes | Fine until DISCOM replaces it |
| Smart meter, import only | No | No | Request bidirectional smart meter |
| Bidirectional smart meter | Yes, interval data | Yes | Check both registers in app |
| Prepaid bidirectional smart meter | Yes | Yes, net adjusted against balance | Track daily balance and export |
What problems are solar owners facing?
- Meter swapped without net mode: the old net meter is replaced by a smart meter that is not configured for export, so exported units go missing or show as consumption.
- Billing lag: export credit shows only at month end, while the prepaid balance drops daily with import.
- Missing old credit: banked units from before the swap not carried forward.
- App confusion: the DISCOM app shows “consumption” as gross import, not net.
How do I check my smart meter is set up correctly?
- Press the display button on the meter and note both import (often code 1.8.0) and export (often 2.8.0) readings. Codes vary by meter make.
- On a sunny afternoon with low home load, the export register should increase.
- Compare with your inverter’s daily generation; export should be generation minus what your home used.
- If export does not move, file a written complaint with photos to your DISCOM and keep the complaint number.
In Varanasi and Purvanchal, see our guide to PuVVNL net metering for the local process.
What do Time-of-Day tariffs mean for solar homes?
A Time-of-Day tariff charges a different rate for electricity depending on the hour it is used, usually cheaper during solar hours and costlier during the evening peak.
The Electricity (Rights of Consumers) Amendment Rules 2023 provide for ToD tariffs: first for commercial and industrial consumers of 10 kW and above, and then for most other consumers (except agriculture) once smart meters are installed. The rules set solar-hour rates at least 20% below normal for C&I and at least 10% below for other consumers, with peak rates higher by similar margins. Actual implementation depends on each state regulator’s tariff order, so many homes are not on ToD yet.
| Time band (illustrative) | Rate vs normal | Solar owner strategy |
|---|---|---|
| Solar hours (about 9 am–5 pm) | 10%–20% lower | Run pump, washing machine, geyser, EV charging |
| Normal hours | Normal | Regular use |
| Peak hours (evening, about 4–5 hours) | at least about 10% higher (domestic), 20% for C&I | Reduce heavy loads; consider battery |
Rates change often, so call us on 8181914448 or fill the form for the latest figure. Businesses should read our ToD tariff guide for businesses.
Does a smart meter change how big my solar system should be?
Slightly. With interval data and ToD, the value of a unit depends on when you use it. If your DISCOM gives export credit at a flat rate but charges higher in evening peak, it pays to:
- Size solar for daytime use plus a modest export, not far beyond annual need.
- Move flexible loads into solar hours.
- Look at a small battery with a hybrid inverter if the peak premium is large in your state.
An energy management system can read both your inverter and meter data and shift loads automatically. See EMS and monitoring.
Is PM Surya Ghar affected?
Under PM Surya Ghar, the subsidy is released after the DISCOM installs the net meter and commissions the system. In areas where smart meters are being rolled out, the DISCOM may fit a bidirectional smart meter as the net meter. The process on pmsuryaghar.gov.in remains the same. See our application guide.
- Smart meters work with net metering only if they are bidirectional and set to record export.
- Check both import and export registers after any meter swap.
- Prepaid meters deduct net consumption; export credit may appear daily or monthly.
- Time-of-Day tariffs reward daytime use and raise the cost of evening imports.
- Keep written records of any meter complaint with photos.
If your new smart meter is not showing solar export, or you want to plan around ToD rates, we can check your meter readings and system data. Contact us or WhatsApp +91 81819 14448.
Send your electricity bill or a roof photo on WhatsApp and we will suggest the right system and price.
Frequently asked questions
Does a smart meter work with rooftop solar net metering?
Yes, if it is a bidirectional (import-export) smart meter configured for net metering. It records units taken from the grid and units exported separately. If your DISCOM fits a smart meter that only records import, ask for it to be replaced with a net meter, because exports would otherwise not be credited.
How does a prepaid smart meter handle solar export?
In most DISCOM setups, the export units are adjusted against import in the billing cycle and the net amount is deducted from your prepaid balance. Some DISCOMs show the adjustment daily, others at month end. Check the DISCOM app for the import and export registers separately.
Will Time-of-Day tariffs reduce my solar savings?
For homes with rooftop solar, ToD often helps, because solar hours are usually charged at a lower rate and evening peak hours at a higher one. It means you should run heavy loads in the day and avoid exporting cheap daytime units only to import costly evening units. A battery becomes more useful where the peak-hour gap is large.
My smart meter shows export as import. What should I do?
Take photos of the meter display showing both registers, download readings from the DISCOM app and file a written complaint with the DISCOM's billing or net metering section. Your installer can help check whether the meter was configured in net mode when it was replaced.
#net metering#prepaid meter#rdss#smart meter#time-of-day tariff