Technical specifications
| Cell technology | N-type TOPCon, half-cut, 144 cells (16BB/SMBB) |
|---|---|
| Rated power (STC) | 580 Wp (range 570–590 Wp) |
| Module efficiency | ≈22.3–22.8% |
| Bifaciality | ≈80% ± 5% |
| Open-circuit voltage (Voc) | ≈51–52 V |
| Temperature coefficient of Pmax | ≈ -0.29 to -0.30%/°C |
| Dimensions | ≈2278 x 1134 x 30 mm |
| Weight | ≈28–32 kg (glass-glass) |
| Construction | Dual glass, anodised aluminium frame, IP68 junction box |
| Max system voltage | 1500 V DC |
| Mechanical load | 5400 Pa front / 2400 Pa rear |
| Standards | BIS (IS 14286 / IEC 61215, IEC 61730), ALMM-listed |
Who is it for?
Factories, warehouses, commercial buildings and EPC contractors building 50 kW–multi-MW plants get the most value from this module. It also works for bungalows with elevated GI structures, carports and open-access projects where every square metre counts. For subsidised home systems under PM Surya Ghar, choose our DCR solar panel instead.
Why choose TOPCon bifacial over Mono PERC?
- More power per area: about 22.5% efficiency versus ~21% for PERC, so fewer modules per kW.
- Lower heat loss: a temperature coefficient near -0.29%/°C helps in Rajasthan, Gujarat and Telangana summers when cells exceed 60°C.
- Rear-side gain: 5–15% extra units on elevated or reflective surfaces.
- Slower degradation: N-type cells resist light-induced degradation, typically about 0.4%/year after year one.
Technical specifications
| Specification | Typical value |
|---|---|
| Cell technology | N-type TOPCon, half-cut, 144 cells (16BB/SMBB) |
| Rated power (STC) | 580 Wp (range 570–590 Wp) |
| Module efficiency | ≈22.3–22.8% |
| Bifaciality | ≈80% ± 5% |
| Open-circuit voltage (Voc) | ≈51–52 V |
| Temperature coefficient of Pmax | ≈ -0.29 to -0.30%/°C |
| Dimensions | ≈2278 x 1134 x 30 mm |
| Weight | ≈28–32 kg (glass-glass) |
| Construction | Dual glass, anodised aluminium frame, IP68 junction box |
| Max system voltage | 1500 V DC |
| Mechanical load | 5400 Pa front / 2400 Pa rear |
| Standards | BIS (IS 14286 / IEC 61215, IEC 61730), ALMM-listed |
Installation & warranty
Install on elevated structures with at least 1 m ground clearance and avoid rear-side shading from purlins to get the bifacial benefit. Dual-glass modules are heavier, so our engineers check wind load (IS 875) and roof strength before design. Typical manufacturer terms are a 12–15 year product warranty and a 30-year linear performance warranty. Use the rooftop solar calculator to size your plant.
Key takeaways
- 580 Wp N-type TOPCon, ~22.5% efficiency, 1500 V DC
- Bifacial gain of 5–15% on elevated or reflective mounting
- Best fit for C&I, carports and large rooftops
- Non-DCR: not for PM Surya Ghar subsidy projects
Planning a commercial plant or a large rooftop? get a free quote for a design with TOPCon bifacial modules, or explore our C&I solar solutions.
Frequently asked questions
How much extra energy does a bifacial panel give?
Rear-side gain is typically 5–15% depending on mounting height and surface reflectivity; white or light-coloured roofs and elevated structures give the higher end.
Is this 580 Wp TOPCon panel eligible for PM Surya Ghar subsidy?
Only DCR modules made with Indian cells qualify for PM Surya Ghar. This module is offered in non-DCR form for C&I and open-access projects; ask us for the DCR variant for subsidised homes.
Can a 580 Wp panel be used on a home rooftop?
Yes, but at about 2.28 m x 1.13 m and 28 kg it needs a sturdy structure and good access. Many homes prefer 540–545 Wp modules for easier handling.
What warranty comes with TOPCon modules?
Manufacturers typically offer a 12–15 year product warranty and a 30-year linear power warranty with about 87–89% output retained at year 30. Exact terms depend on the supplied make.