PM Surya Ghar: get up to ₹78,000 subsidy on home rooftop solar — scheme open till 31 March 2027 · Check your subsidy →

Solar Operation & Maintenance (O&M) and AMC

Keep your solar plant producing at its best with scheduled cleaning, preventive checks, fast fault response and EMS monitoring. Compare our Basic, Standard and Comprehensive plans.

Quick answer: Solar O&M keeps your plant producing what it was designed for. Dust, loose connections and inverter faults can cut output by 10–25%. SolarEMS offers three AMC plans, Basic, Standard and Comprehensive, covering cleaning, preventive checks, corrective maintenance and EMS monitoring for residential and C&I systems. Pricing is on request after a site assessment.
Solar DC cabling and combiner box Footage: Electro Jam Pasargad Co. (public domain mark), via Internet Archive

Why does solar O&M matter in India?

Indian conditions are tough on solar plants. Dust and pollution in North India, sand in Rajasthan and Gujarat, bird droppings, salt air near the coast, heavy monsoon rain and summer temperatures above 45°C all reduce output and stress components. A plant that loses even 10% of generation can lose lakhs of rupees in savings over its life. Regular maintenance protects your return on investment and equipment warranties, which often require proper installation and care.

  • Soiling losses of 15–25% are common in dry, dusty months without cleaning
  • Hot spots from damaged cells or shading can permanently damage modules
  • Loose DC connectors can cause arcing and fire risk
  • Inverter faults may go unnoticed for weeks without monitoring
  • Corroded earthing reduces safety during lightning and faults

What does solar O&M include?

Preventive maintenance

  • Module cleaning with soft brushes and low-TDS water, avoiding harsh chemicals
  • Visual inspection for cracks, delamination, discolouration and hot spots
  • Tightening of structure bolts and checking for corrosion
  • Inspection of DC/AC cables, connectors, junction boxes and distribution boards
  • Earthing resistance measurement and lightning arrester checks
  • Inverter cleaning, fan and filter checks, and firmware updates where needed
  • Vegetation control and drainage checks for ground-mount plants

Corrective maintenance

  • Fault diagnosis and repair after alerts or breakdowns
  • Replacement of failed fuses, SPDs, connectors and minor components
  • Warranty claim coordination with module and inverter manufacturers

Performance monitoring

  • EMS monitoring of generation, performance ratio and alarms
  • Comparison of actual output with expected generation for weather conditions
  • Monthly or quarterly performance reports

How do our AMC plans compare?

Choose the plan that fits your system size, location and how hands-off you want to be. All prices are on request after a site assessment.

Feature Basic Standard Comprehensive
Best suited for Homes and small systems Larger homes, societies, small businesses C&I plants, institutions, critical facilities
Panel cleaning visits Periodic (quarterly) Monthly Scheduled to site dust levels (weekly to fortnightly)
Preventive maintenance visits 1 per year 2 per year Quarterly
Visual inspection of modules and structure Yes Yes Yes
Inverter health check Yes Yes Yes, with firmware and settings review
Earthing and lightning protection testing Annual Annual Bi-annual
Connector and termination torque check Not included Yes Yes
Thermal imaging (IR scan) Not included Annual Bi-annual
IV-curve testing Not included On request Annual (sample strings)
EMS monitoring and alerts App access App access with alert review Active remote monitoring by our team
Performance reports Not included Quarterly Monthly, with PR and availability
Corrective maintenance labour Chargeable Included Included
Minor spares (fuses, connectors, SPDs) Chargeable Chargeable Included
Warranty claim coordination Yes Yes Yes, end-to-end
Response time to faults Standard Priority Defined SLA
Price On request On request On request

Plans can be customised. For example, you can add extra cleaning cycles during the dry season or a pre-monsoon structural inspection.

How often should panels be cleaned?

Environment Suggested cleaning frequency
Residential, moderate dust Every 2–4 weeks
Urban North India in winter smog or dry summer Every 1–2 weeks
Industrial areas, cement or stone units nearby Weekly
Desert regions (western Rajasthan, Kutch) Weekly or more
Monsoon months Less frequent; rain helps, but check for bird droppings and moss

Clean early in the morning or evening when panels are cool, never with high-pressure jets, abrasive tools or hard water that leaves deposits.

What KPIs do we track for C&I plants?

  • Performance ratio (PR): actual output relative to theoretical output for the measured irradiation; well-maintained plants typically achieve around 75–85%.
  • Specific yield: kWh generated per kWp installed, compared with the design estimate.
  • Plant availability: percentage of time the plant is able to generate.
  • Grid availability: separates DISCOM outages from plant issues.
  • Mean time to repair: how quickly faults are resolved.

These metrics come from our EMS platform and are shared in regular reports. Learn more on our commercial and industrial solar page.

Can you take over a system installed by someone else?

Yes. We begin with a health check: visual inspection, thermal scan, electrical tests, earthing checks and a review of generation history. We then share a report listing any safety issues or performance losses, with recommended fixes, before starting the AMC. This is useful for plants whose original installer is no longer responsive, or where generation has fallen below expectations.

What can owners do between service visits?

  • Check the monitoring app daily or weekly for unusual drops
  • Keep the area around the inverter ventilated and dry
  • Do not walk on panels or place objects on them
  • Report any burning smell, unusual sound or error code immediately
  • Trim trees that begin to shade the array

Estimate your system’s expected generation with our rooftop solar calculator to compare against actual output.

Key takeaways

  • Without maintenance, output can fall 10–25% in Indian conditions.
  • Our plans are Basic, Standard and Comprehensive, with prices on request.
  • Comprehensive plans include active remote monitoring and minor spares.
  • Cleaning frequency depends on local dust and season.
  • We can take over systems installed by other companies after a health check.

Protect your solar investment

Tell us about your system and location, and we will recommend the right AMC plan and share a quote. Request an AMC quote. New project? See our EPC services and residential solar offerings.

Frequently asked questions

Does a solar system need maintenance?

Yes. Panels need regular cleaning, and wiring, earthing, inverters and structures need periodic checks. Without maintenance, dust and faults can reduce output by 10–25%.

How often should solar panels be cleaned?

Typically every 2–4 weeks for homes and weekly to fortnightly for C&I plants, more often in dusty or dry months and less in the monsoon. Industrial and desert areas may need more frequent cleaning.

What is the difference between AMC and warranty?

Warranties cover manufacturing defects in specific equipment. An AMC covers the service work of cleaning, inspection, preventive maintenance and fault response that keeps the whole system performing.

Do you maintain systems installed by others?

Yes. After an initial health check to assess condition and safety, we can take over O&M for systems installed by other companies.

How much does an AMC cost?

Pricing depends on system size, location, cleaning frequency and plan scope. All plans are priced on request after a site assessment.

सूर्य की शक्ति, भारत की प्रगति

Get a free site survey & solar quote

Tell us your monthly bill and roof size. Our engineer will design the right system, estimate subsidy and share a transparent quote — no obligation.